Control Unit for Professional Sliding Gates, Up-and-Over Doors, Barriers and Roller Shutters

UNIVERSAL

Compatible with all 230V motors from:
Came, Nice, Faac, Rib, Tau, Beninca, Bft, Ditec, Vds, Life, Aprimatic and all other brands.

- Built-in 433,92 MHz radio receiver with fixed-code or HCS rolling-code operation.

WARNING: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it is specifically compatible with certain 433,92 MHz coding systems. The exact list of compatible models is provided below:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling-code systems used by the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim and Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Remote Controls

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note on universal remote controls: The Aster 21/a and Aster 31/1 models can be used as "master" remotes to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

Dimensions: w.130 x h.95 x d.40 mm

GENERAL INFORMATION
This self-learning universal control unit is designed to automate one access point powered by a 230VAC motor with limit switches. It features an innovative self-learning procedure for quick installation and two trimmers for fine adjustment of the main parameters: deceleration force and operating force.

Available options:
- A quick self-learning programming mode, in which the control unit automatically learns the operating times and sets the start of deceleration during both opening and closing at 85% of the operating cycle.
- A professional programming mode, in which the installer can set when the gate leaf starts to decelerate, enable pedestrian opening by remote control, and configure how the safety devices operate.

KEY FEATURES
• Control and operation of automated access systems with 1 230VAC motor (max. 600W)
• NC open-close limit switch input
• Motor speed adjustable by trimmer from 50-100%.
• Partial (pedestrian) opening by remote control or via terminal block
• Pause time adjustable by trimmer from 0 to 120 seconds.
• Initial settings via DIP switches
• Indicator LED
• 230VAC courtesy light control, 100W max.
• Built-in 433MHz receiver with a maximum capacity of 254 stored radio codes
• Built-in flashing light logic control
• Complies with the relevant European directives: R&TTE 99/05/CE

CLICK THE LINK FOR THE INSTRUCTION MANUAL:
MANUFACTURER'S INSTRUCTION MANUAL

TECHNICAL SPECIFICATIONS
Transformer power supply: 230/18VAC 10VA
Control unit power supply: 230 VAC
Motor output: 230V max. 600W
Max. motor and accessory current draw: Max. 8 amperes, fuse-protected
Accessory power supply: 24 VDC - 150 mA, fuse-protected
Operating ambient temperature: -20°C / + 55 °C
Programming parameters: stored in EEPROM

24-month warranty
eb:233249161916