230 V Swing Gate Control Unit
433.92 MHz Receiver 

Mod. EKOS-M2 230v

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

The universal self-learning control unit is designed to automate an access point with 1 or 2 230 VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine adjustment of the main parameters: force, pause time, obstacle detection sensitivity and closing delay between the two motors.

Available functions:

- quick self-learning programming, in which the control unit automatically performs the learning cycle to determine operating times and sets the start of the slowdown phase, during both opening and closing, at 90% of the cycle.

- professional programming, which allows the installer to set when the gate leaves start to slow down, enable pedestrian opening by radio control, and select how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Controls and operates automated access points with 1 or 2 230 VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedures to acquire operating and slowdown times and detect the presence of safety devices.

• Motor force adjustable from 50-100% using a trimmer.

• Customizable partial (pedestrian) opening

• Pause time adjustable from 0 to 60 seconds using a trimmer.

• Obstacle detection response time adjustable from 0.1 to 3.0 seconds using a trimmer.

• Motor closing delay adjustable from 3 to 30 seconds using a trimmer

• 12 V 15 W electric lock management

• Courtesy light management

• Built-in 433 MHz receiver

• Stores 254 radio codes

• Reprogrammable Flash microprocessor

• Complies with applicable European Directive: R&TTE 99/05/EC

• Supports radio controls with either simple fixed code or rolling code. Compatibility with other brands must be checked

WARNING: Radio Control Compatibility Guide

The receiver integrated into the control unit is not universal; it communicates specifically with certain 433.92 MHz coding systems. Below is the exact list of compatible models:

1. Compatible ROLLING CODE Radio Controls

The control unit supports the high-security rolling code technology used by the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim and Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Radio Controls and Universal Control

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note on universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" remotes to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them ready to use with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230 VAC

Motor output: 2 x 1/2Hp

Motor current: Max. 8 Amps

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function controller: microprocessor with watchdog

24-month warranty
eb: 233249166586