Control Unit for 230 V Swing Gates
433.92 MHz Receiver

Mod. EKOS-M2 230v

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

The universal self-learning control unit is designed to automate an access point with 1 or 2 230 VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine-tuning the main parameters: force, pause time, obstacle detection sensitivity and closing delay between the two motors.

Available options:

- a quick self-learning programming mode, in which the control unit automatically performs the manoeuvre to learn the operating times and sets the start of deceleration, both when opening and closing, at 90% of the manoeuvre.

- a professional programming mode, in which the installer can set when the gate leaves begin to decelerate, enable pedestrian opening via radio control and select how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Control of automated access points with 1 or 2 230 VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedures for learning operating and deceleration times and detecting the presence of safety devices.

• Motor force adjustable via trimmer from 50-100%.

• Customisable partial (pedestrian) opening

• Pause time adjustable via trimmer from 0 to 60 seconds.

• Obstacle detection response time adjustable via trimmer between 0.1 and 3.0 seconds.

• Motor closing delay adjustable via trimmer between 3 and 30 seconds

• 12 V 15 W electric lock management

• Courtesy light management

• Built-in 433 MHz receiver

• 254 storable radio codes

• Reprogrammable Flash microprocessor

• Complies with the relevant European Directive: R&TTE 99/05/EC

• Compatible with fixed-code or rolling-code radio controls. Compatibility with other brands must be verified

WARNING: Radio Control Compatibility Guide

The receiver integrated into the control unit is not universal; it communicates specifically with certain 433.92 MHz coding systems. Below is the exact list of compatible models:

1. Compatible ROLLING CODE Radio Controls

The control unit supports the high-security rolling code encoding of the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim and Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Radio Controls and Universal Compatibility

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note for universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" controls to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230 VAC

Motor output: 2 x 1/2 Hp

Motor current: Max. 8 A

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function controller: microprocessor with watchdog

24-month warranty
eb: 372685019863