230 V Control Unit for Swing Gates
433.92 MHz Receiver 

Mod. EKOS-M2 230v

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

This universal self-learning control unit is designed to automate an access point with 1 or 2 230 VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine adjustment of the main parameters: force, pause time, obstacle detection sensitivity, and closing delay between the two motors.

Available features:

- quick self-learning programming, in which the control unit automatically performs the manoeuvre to learn operating times and sets the start of deceleration, both during opening and closing, at 90% of the manoeuvre.

- professional programming, in which the installer can determine when leaf deceleration starts, enable pedestrian opening by radio, and set how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Controls and manages automated access systems with 1 or 2 230 VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedure for learning operating and deceleration times, and detecting the presence of safety devices.

• Motor force adjustable from 50-100% using a trimmer.

• Customisable partial (pedestrian) opening

• Pause time adjustable from 0 to 60 seconds using a trimmer.

• Obstacle detection response time adjustable between 0.1 and 3.0 seconds using a trimmer.

• Motor closing delay adjustable between 3 and 30 seconds using a trimmer

• 12 V 15 W electric lock control

• Courtesy light control

• Built-in 433 MHz receiver

• Stores up to 254 radio codes

• Reprogrammable Flash microprocessor

• Complies with the relevant European Directive: R&TTE 99/05/CE

• Supports remote controls with either simple fixed codes or rolling codes. Compatibility with other brands must be checked

WARNING: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it works specifically with certain 433.92 MHz coding systems. Below is the exact list of compatible models:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling code system used by the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED CODE Remote Controls and Universal Compatibility

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note for universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" remote controls for pairing commercial universal remote controls. Simply clone the code directly from one remote control to another to make them work immediately with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230 VAC

Motor output: 2 x 1/2Hp

Motor current: Max 8 Amps

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function controller: microprocessor with watchdog

24-month warranty
eb: 233249118792