Shipping
Shipping in 5-10 business days
Description
Sintap Roller Shutter Alarm Sensor, Tear, Cut and Lift Analysis Board
Model SV-MSI
SKU: SV-MSI
FAST PULSE COUNTER FOR SWITCHALLARM ROLLER SHUTTERS SINTAP ALARM COMPONENT
SV-MSI Counter module for fast NC and NO electrical pulses; it can monitor line continuity. Using a jumper, it can be programmed for 1 to 8 very short pulses (under 500 mS); counting ends when the relay is activated. Use: analysis of the SS-SAL Switchallarm, as well as any other sensor. If programmed for 2 or more pulses, it must receive at least 2 pulses within eight minutes to generate an alarm. The counting system has an automatic reset and activates after 8 minutes without receiving any further pulses. It can be programmed to count pulses only, without monitoring line integrity, making it suitable for unreliable contacts that may remain open; or to monitor line integrity. It can be used to check that multiple sensors (infrared, photocells, dual-technology sensors) trigger an alarm simultaneously or consecutively, to monitor an entrance or a route, or to prevent false alarms from sensors that trigger too quickly. Power supply: 12 V. Relay output: 1 changeover contact, 1 A, 24 V. Dimensions L70XL55XH14 mm. Weight 23 g. Assembled at the Securvera facility in Rome. Guaranteed by law against manufacturing defects and faults.
SS-SAL Switchallarm NC mechanical contact. The system is activated by a nylon cord approximately 2.7 to 3 meters long (mechanically determined), wound around and sliding over pulleys. The cord's movement opens the contact for approximately 50 mS. (Requires the SV-MSI pulse counter amplifier.) Suitable for roller shutters and security grilles; protects them against cutting, tearing, and lifting. Dimensions L102XL90XS16 mm. Weight 30 g. Assembled at the Securvera facility in Rome. Guaranteed by law against manufacturing defects and faults.
CLICK HERE TO DOWNLOAD THE MANUAL OR DIY GUIDE
MANUFACTURER'S MANUAL
24-month warranty
eb: 235974845187
