Securvera SS-SAL3CCSCIA Pulse-Counting Pull-Cord Contacts for Roller Shutters

Save €2,30

Model: eb-235974866225
Warranty: 24 Mesi
Supplier: Securvera
Price:
€43,66 €45,96

Do you need documentation for this product (installation, configuration, and programming)?

Do you need a direct management contact for large orders?

Do you need help with this product? Contact us
Whatsapp-Share

Share this product
Email-Share Whatsapp-Share Facebook-Share Copy-Share

Shipping

Shipping in 5-10 business days

Description

Sintap 4 Roller Shutter Anti-Theft Sensor, Pulse Counter Board, Cord Contact for Security Grilles

Mod. SS-SAL3CCSCIA

SKU: SS-SAL3CCSCIA

FAST PULSE COUNTER FOR ROTELLO SWITCHALLARMS SINTAP ALARM COMPONENT
SV-MSI Counter module for fast NC and NO electrical pulses; it can monitor line continuity. Using the jumper, it can be set from 1 to 8 very short pulses (less than 500 ms); counting ends when the relay is activated. Application: analysis of the SS-SAL switchallarm, as well as any other sensor. When set to 2 or more pulses, it must receive at least 2 pulses within eight minutes to generate an alarm. The counting system has an automatic reset and activates after 8 minutes without receiving further pulses. It can be set to count pulses only, without monitoring line integrity, making it suitable for unreliable contacts that may remain open; alternatively, it can monitor line integrity. It can be used to ensure that multiple sensors (infrared sensors, photocells, dual-technology sensors) trigger an alarm simultaneously or consecutively, to monitor an entrance or a route, and to prevent false alarms from sensors that are too fast. Power supply 12 V. Relay output: 1 changeover contact, 1 A, 24 V. Dimensions L70 x W55 x H14 mm. Weight 23 g. Assembled at the Securvera facility in Rome. Covered by the statutory warranty against manufacturing defects.

SS-SAL Switchallarm NC mechanical contact. The system is operated by a nylon cord approximately 2.7 to 3 metres long (mechanically determined), wound around and sliding over pulleys. The movement of the cord causes the contact to open for approximately 50 ms. (Requires the SV-MSI pulse counter amplifier.) Suitable for roller shutters and security grilles, protecting them against cutting, tearing and lifting. Dimensions L102 x W90 x D16 mm. Weight 30 g. Assembled at the Securvera facility in Rome. Covered by the statutory warranty against manufacturing defects.


CLICK HERE TO DOWNLOAD THE MANUAL OR DIY GUIDE

MANUFACTURER'S MANUAL

24-month warranty

eb: 235974866225