Shipping
Shipping in 5-10 business days
Description
Sintap Roller Shutter Anti-Theft Sensor, 3 Contacts, Cord for Rolling Doors, Pulse Counter Board
Model SS-SAL2CCSCIB
SKU: SS-SAL2CCSCIB
FAST PULSE COUNTER FOR SWITCHALLARM ROTELLO SINTAP ALARM COMPONENT
SV-MSI counter module for fast electrical pulses, NC and NO; can monitor line continuity. Programmed via jumper for 1 to 8 very short pulses (under 500 ms); counting ends when the relay activates. Use: analysis of the SS-SAL Switchallarm, as well as any other sensor. When set to 2 or more pulses, it must receive at least 2 pulses within eight minutes to trigger an alarm. Auto-reset counting system activates after 8 minutes without further pulses. Can be programmed to count pulses only, without monitoring line integrity, suitable for unreliable contacts that may remain open; or to monitor line integrity. It can be used to check whether multiple sensors (infrared, photocells, dual-technology) trigger simultaneously or consecutively, to monitor an entrance or route, and to prevent false alarms from overly fast sensors. 12 V power supply. Relay output: 1 changeover contact, 1 A, 24 V. Dimensions: L70 × W55 × H14 mm. Weight: 23 g. Assembled at the Securvera facility in Rome. Guaranteed by law against manufacturing defects and faults.
SS-SAL Switchallarm NC mechanical contact. The system is operated by a nylon cord approximately 2.7 to 3 metres long (mechanically determined), wound around and sliding over pulleys. The cord's movement opens the contact for approximately 50 ms (requires the SV-MSI pulse counter amplifier). Suitable for roller shutters and rolling doors, protecting them against cutting, tearing and lifting. Dimensions: L102 × W90 × D16 mm. Weight: 30 g. Assembled at the Securvera facility in Rome. Guaranteed by law against manufacturing defects and faults.
CLICK HERE TO DOWNLOAD THE MANUAL OR DIY GUIDE
MANUFACTURER'S MANUAL
24-month warranty
eb: 226616392479
