Benincà Tilty24 917603725 24 Vdc Control Unit, Automation Systems

24 Vdc control unit with integrated receiver and battery charger

Mod. TILTY24

SKU: 917603725

24 Vdc
Control unit that manages the encoder for maximum precision during automation operating cycles
Intelligent power control system that acquires dynamic data through precise torque calculations. The STC System identifies potential critical points by adjusting torque according to the measured operating profile and actual requirements
433.92 MHz receiver with exclusive Advanced Rolling Code (ARC) coding
Function that automatically adjusts operating parameters to simplify system installation and testing
Ability to set the number of cycles after which the system issues a maintenance request alert
Allows a programming protection code to be set for the control unit, preventing access to menus and changes to parameters
Ready for connection to X.BE (KNX) and Q.BE (MQTT) accessories
Ready for control unit management via the BeUP app and the pro.UP accessory, which replicates the control unit menu, allowing you to adjust parameters and logic, read error messages, and update firmware. Remote diagnostics can be performed, gate status checked, and commands sent
64 transmitters can be stored in the receiver
Standby power consumption compliant with European Regulation (EU) 2023/826

APPLICATION

1 or 2 actuators for up-and-over doors

CONTROL UNIT POWER SUPPLY

100 ÷ 250 Vac - 50/60 Hz

MOTOR POWER SUPPLY

24 Vdc / 130 W + 130 W

MAIN FUNCTIONS

Integrated LCD display
Integrated 433.92 MHz radio receiver, 64 codes, with ARC radio coding
Removable terminal blocks
Automatic, semiautomatic, and hold-to-run operating logic
Encoder input
Step-by-step and stop inputs
Photocell input configurable as an input for an N.C. or 8K2 safety edge
Two inputs configurable as open, close, photocell during opening and closing, photocell during closing, opening and closing limit switches, depending on the motor
Limit switch input
Separate power supply output for each motor
24 Vdc flashing light output
24 Vdc accessory power supply output, max. 500mA
Output (230Vac, 5A max.) configurable as gate-open indicator, courtesy light, area light, second radio channel, photocell test, flashing light, gate-open alarm, or NC input alarm
24 Vdc service light output
Automatic operating parameter setup
Electronic torque adjustment
Separate electronic adjustment of opening and closing speeds
Anti-crushing protection with current sensing and encoder management
Electronic torque adjustment with automatic calculation for every point along the travel (STC SYSTEM)
Adjustable deceleration during opening and closing
Integrated ESA+ energy saving system
Ready for KNX connection via X.BE board (optional)
Ready for management, configuration, diagnostics, and firmware updates via the BeUP app using the PRO.UP accessory
Parameter configuration and remote control management via the Advantouch system
Number of operations
Access and programming password
Maintenance alert
Integrated battery charger, compatible with 2 x 12V 1.2Ah batteries
Standby power consumption compliant with European Regulation (EU) 2023/826

TECHNICAL DATA:
Control unit power supply: 100 ÷ 250 Vac - 50/60 Hz
Motor power supply: 24 Vdc / 130 W + 130 W
No. of storable codes: 64
Encoder: Yes
Virtual encoder: No
Inverter technology: No
STC System: Yes
ARC On

24-month warranty

eb: 376519028458