Control Unit for 230V Swing Gates
433.92 MHz Receiver 

Mod. EKOS-M2 230V

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

The universal self-learning control unit is designed to automate an access point with 1 or 2 230VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine-tuning the main parameters: force, pause time, obstacle detection sensitivity and closing delay between the two motors.

Available programming modes:

- A quick self-learning mode, in which the control unit automatically performs the learning cycle to acquire operating times and sets the start of deceleration at 90% of the cycle, both when opening and closing.

- A professional programming mode, in which the installer can set when the leaves start to decelerate, enable pedestrian opening by radio and select how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Controls and manages automated access systems with 1 or 2 230VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedures for acquiring operating and deceleration times and detecting the presence of safety devices.

• Motor force adjustable from 50-100% using a trimmer.

• Customisable partial (pedestrian) opening

• Pause time adjustable from 0 to 60 seconds using a trimmer.

• Obstacle detection response time adjustable between 0.1 and 3.0 seconds using a trimmer.

• Motor closing delay adjustable between 3 and 30 seconds using a trimmer

• 12V 15W electric lock management

• Courtesy light management

• Built-in 433MHz receiver

• 254 radio codes can be stored

• Reprogrammable Flash microprocessor

• Complies with the relevant European Directive: R&TTE 99/05/CE

• Supports remote controls with either simple fixed-code or rolling-code technology. Compatibility with other brands must be checked

WARNING: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it communicates specifically with certain 433.92 MHz coding systems. The exact list of compatible models is below:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling-code technology used by the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim and Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Compatibility

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note on universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" remotes to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them ready for use with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230VAC

Motor output: 2 x 1/2Hp

Motor current: Max 8 Ampere

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function controller: microprocessor with watchdog

24-month warranty
eb: 372684987548