Shipping
shipping in 2-4 business days
Description
Control unit for swing gates
12v with 433.92 MHz receiver
COMPATIBLE WITH APRITECH M01.190.00
Professional
with Box and Transformer
UNIVERSAL
SUITABLE FOR ALL AUTOMATIONS
1. GENERAL INFORMATION
The self-learning universal control unit was designed for the automation of access to 1 or 2 12V motors and is equipped with an innovative self-learning procedure for rapid installation and four trimmers for fine adjustment of the main parameters; force, pause time, obstacle control sensitivity and closing lag between the two motors.
CLICK ON THE LINK FOR THE INSTRUCTION MANUAL:
MANUFACTURER'S INSTRUCTION MANUAL
Are available:
- rapid self-learning programming, in which the control unit automatically carries out the learning maneuver of the maneuver times and sets the start of the slowdown both during opening and closing at 90% of the manoeuvre.
- professional programming in which the installer can determine the starting moment of the slowdown of the leaves, the enabling of pedestrian opening via radio, the intervention mode of the safety devices.
2. MAIN FEATURES
Command and control of automated accesses with 1 or 2 12V motors (max 1/2 Hp)
Simplified and professional self-learning procedure for the acquisition of: maneuver and slowdown times, and the presence of safety devices.
Motor force adjustable via trimmer from 50-100%.
Customizable partial (pedestrian) opening
Dwell time adjustable via trimmer from 0 to 60 seconds.
Obstacle control intervention time adjustable via trimmer between 0.1 and 3.0 seconds.
Closing motor phase shift adjustable via trimmer between 3 and 30 seconds
12V 15W electric lock management
Courtesy light management
Built-in 433MHz receiver
255 memorized radio codes
On-board reprogrammable Flash microprocessor via serial interface.
Complies with the relevant European Directives: R&TTE 99/05/CE
3. TECHNICAL CHARACTERISTICS
Central power supply: 230VAC
Engine output: 2 x 1/2Hp
Motor current: Max 8 Ampere
Accessory power supply: 12 VDC - 750 mA
Operating temperature: -20°C / + 55 °C
Programming parameters: stored in EE-PROM
Function manager: microprocessor with watch-dog
24 month warranty
