230V Swing Gate Control Unit
433.92 MHz Receiver 

Mod. EKOS-M2 230V

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

This self-learning universal control unit is designed to automate an access point with 1 or 2 230VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine adjustment of the main parameters: force, pause time, obstacle detection sensitivity and closing delay between the two motors.

Available options:

- quick self-learning programming, in which the control unit automatically performs the operation-time learning procedure and sets the start of deceleration, both when opening and closing, at 90% of the operation.

- professional programming, in which the installer can determine when the gate leaves begin to decelerate, enable pedestrian opening via radio, and set how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Controls and manages automated access systems with 1 or 2 230VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedures for learning operating and deceleration times and detecting the safety devices.

• Motor force adjustable from 50-100% using a trimmer.

• Customisable partial (pedestrian) opening

• Dwell time adjustable from 0 to 60 seconds using a trimmer.

• Obstacle detection response time adjustable from 0.1 to 3.0 seconds using a trimmer.

• Motor closing delay adjustable from 3 to 30 seconds using a trimmer

• 12V 15W electric lock management

• Courtesy light management

• Built-in 433MHz receiver

• 254 radio codes can be stored

• Reprogrammable Flash microprocessor

• Complies with the relevant European Directive: R&TTE 99/05/CE

• Supports remote controls with either simple fixed codes or rolling codes. Compatibility with other brands must be checked

WARNING: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it communicates specifically with certain 433.92 MHz encodings. Below is the exact list of compatible models:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling code encoding used by the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Control

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note for universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" remotes to pair with commercially available universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230VAC

Motor output: 2 x 1/2Hp

Motor current: Max 8 Amps

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function manager: microprocessor with watchdog

24-month warranty
eb: 223542878851