Control Unit for Sliding Gates, Up-and-Over Garage Doors, Barriers and Roller Shutters - Professional

UNIVERSAL

Compatible with all 230V motors from:
Came, Nice, Faac, Rib, Tau, Beninca, Bft, Ditec, Vds, Life, Aprimatic and all other brands.

- Integrated 433,92 MHz radio receiver with fixed-code or HCS rolling-code management.

WARNING: Remote Control Compatibility Guide

The receiver integrated into the control unit is not universal; it communicates specifically with certain 433,92 MHz coding systems. Below is the exact list of compatible models:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling-code systems of the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Remote Control Management

If you use fixed-code remote controls, compatibility is guaranteed for:

Aster 21/a and Aster 31/1 models

Note on universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" controls to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

Dimensions: W.130 x H.95 x D.40 mm

GENERAL INFORMATION
The self-learning universal control unit is designed to automate one access point with one 230VAC motor with limit switches. It features an innovative self-learning procedure for quick installation and two trimmers for fine-tuning the main parameters: deceleration force and operating force.

Available features:
- Quick self-learning programming, in which the control unit automatically learns the operating times and sets the start of deceleration during both opening and closing at 85% of the travel.
- Professional programming, which allows the installer to determine when the gate leaf starts to decelerate, enable pedestrian opening via radio, and set how the safety devices operate.

MAIN FEATURES
• Control of one automated access point with one 230VAC motor (max. 600W)
• Open-close limit switch input, NC
• Motor speed adjustable from 50-100% using a trimmer.
• Partial (pedestrian) opening via remote control or terminal block
• Pause time adjustable from 0 to 120 seconds using a trimmer.
• Initial settings via DIP switches
• Indicator LED
• 230VAC courtesy light control, 100W max.
• Built-in 433MHz receiver with a maximum capacity of 254 stored radio codes
• Built-in flashing light logic control
• Complies with the applicable European Directive: R&TTE 99/05/CE

CLICK THE LINK FOR THE INSTRUCTION MANUAL:
MANUFACTURER'S INSTRUCTION MANUAL

TECHNICAL SPECIFICATIONS
Transformer power supply: 230/18VAC 10VA
Control unit power supply: 230 VAC
Motor output: 230V max. 600W
Max. motor and accessory current draw: Max. 8 Ampere, fuse-protected
Accessory power supply: 24 VDC - 150 mA, fuse-protected
Operating ambient temperature: -20°C / + 55 °C
Programming parameters: stored in EEPROM

24-month warranty
eb:233249198539