Control Unit for Sliding Gates, Up-and-Over Garage Doors, Barriers and Roller Shutters - Professional

UNIVERSAL

Compatible with all 230V motors from:
Came, Nice, Faac, Rib, Tau, Beninca, Bft, Ditec, Vds, Life, Aprimatic and all other brands.

- Built-in 433,92 MHz receiver with fixed-code or HCS rolling-code management.

IMPORTANT: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it works specifically with certain 433,92 MHz coding systems. See below for the exact list of compatible models:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling-code system used by the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim and Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Control

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note on universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" remotes to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

Dimensions: w.130 x h.95 x d.40 mm

GENERAL INFORMATION
This self-learning universal control unit is designed to automate one access point with a 1-motor 230VAC system with limit switches. It features an innovative self-learning procedure for quick installation, plus two trimmers for fine adjustment of the main parameters: deceleration force and operating force.

Available functions:
- Quick self-learning programming, in which the control unit automatically performs the learning cycle to calculate operating times and sets the start of deceleration to 85% of the cycle during both opening and closing.
- Professional programming, which allows the installer to determine when the gate starts to decelerate, enable pedestrian opening via remote control, and configure how the safety devices operate.

MAIN FEATURES
• Control and operation of automated access systems with 1 motor, 230VAC (max. 600W)
• Normally closed (NC) open-close limit switch input
• Motor speed adjustable via trimmer from 50-100%.
• Partial (pedestrian) opening via remote control or terminal block
• Pause time adjustable via trimmer from 0 to 120 seconds.
• Initial settings via DIP switches
• Indicator LED
• 230VAC courtesy light control, 100W max.
• Built-in 433MHz receiver with a maximum capacity of 254 stored radio codes
• Built-in flashing light logic control
• Compliant with the relevant European Directive: R&TTE 99/05/CE

CLICK THE LINK FOR THE INSTRUCTION MANUAL:
MANUFACTURER'S INSTRUCTION MANUAL

TECHNICAL SPECIFICATIONS
Transformer power supply: 230/18VAC 10VA
Control unit power supply: 230 VAC
Motor output: 230V max. 600W
Max. current draw of motor and accessories: Max. 8 Amp, protected by fuse
Accessory power supply: 24 VDC - 150 mA, protected by fuse
Operating ambient temperature: -20°C / + 55 °C
Programming parameters: stored in EEPROM

24-month warranty
eb:223542847425