Came Zbx7n Ex Zbx78 Central Control Panel Control Unit Card 230v 88001-0065

ZBX7N Plus Control Board for BX-A/BX-B Sliding Gate Operators

The ZBX7N control board is suitable for operating 230V single-phase BX-A/BX-B series sliding gate operators. The board must be powered at 230V (a.c.) via terminals L1 and L2. It is protected at the input by two 5A fuses, while the low-voltage (24V) control devices are protected by a 1A fuse. It replaces the old CAME boards: ZBX6 and ZBX7. The total power consumption of the accessories (24V) must not exceed 20W. Safety. - The photocells can be connected and configured for: - Reopening during closing (2-C1): if the photocells detect an obstacle while the gate is closing, they reverse its direction until it is fully open; - Partial stop: the gate stops while moving and is then set up for automatic closing (2-C3); - Total stop (1-2): the gate stops and the automatic closing cycle is disabled. To resume gate movement, use the push-button panel or remote control.