230V Control Unit for Swing Gates
433.92 MHz Receiver

Mod. EKOS-M2 230V

UNIVERSAL
for electromechanical and hydraulic operators
Professional

1. GENERAL INFORMATION

The universal self-learning control unit is designed to automate an access point with 1 or 2 230VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine adjustment of the main parameters: force, pause time, obstacle detection sensitivity, and closing delay between the two motors.

Available options:

- quick self-learning programming, in which the control unit automatically performs the learning cycle to determine operating times and sets the start of deceleration, both during opening and closing, at 90% of the cycle.

- professional programming, in which the installer can set when the leaves start to decelerate, enable pedestrian opening via radio control, and select how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Control and operation of automated access points with 1 or 2 230VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedures for learning operating and deceleration times, and detecting the presence of safety devices.

• Motor force adjustable via trimmer from 50-100%.

• Customizable partial (pedestrian) opening

• Pause time adjustable via trimmer from 0 to 60 seconds.

• Obstacle detection response time adjustable via trimmer from 0.1 to 3.0 seconds.

• Motor closing delay adjustable via trimmer from 3 to 30 seconds

• 12V 15W electric lock control

• Courtesy light control

• Built-in 433MHz receiver

• 254 radio codes can be stored

• Reprogrammable Flash microprocessor

• Complies with the relevant European Directives: R&TTE 99/05/CE

• Supports radio controls with either simple fixed codes or rolling codes. Compatibility with other brands must be checked

WARNING: Radio Control Compatibility Guide

The receiver built into the control unit is not universal; it communicates specifically with certain 433.92 MHz coding systems. The exact list of compatible models is provided below:

1. Compatible ROLLING CODE Radio Controls

The control unit supports the high-security rolling code system used by the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Radio Controls and Universal Compatibility

If you use fixed-code remote controls, compatibility is guaranteed for:

Aster 21/a and Aster 31/1 models

Note for universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" controls to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230VAC

Motor output: 2 x 1/2Hp

Motor current: Max. 8 Amperes

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function manager: microprocessor with watchdog

24-month warranty
eb: 233249033590