Shipping
Shipping in 2-4 business days
Description
Complete Kit for Up-and-Over Door Automation
Counterweight
THE IRON ARMS IN THE BAZER UP-AND-OVER KIT MUST BE WELDED
for Intensive Use
Professional
Mod. BAZER 1M
The Bazer gearmotor is suitable for operating counterweight up-and-over doors with a maximum surface area of approximately 9 m².
It is equipped with a mechanical release system that allows the door to be operated manually in the event of a power outage.
Supplied as standard with limit switches for opening and closing.
Can be equipped with a courtesy light and electronic control unit with slowdown.
For large up-and-over doors, the use of two gearmotors is recommended.
WE RECOMMEND INSTALLING THIS AUTOMATION WHEN
THE SPACE BETWEEN THE DOOR AND THE CEILING IS LESS THAN 10CM
IF THE DOOR IS MORE THAN 3 M WIDE, THE 2-MOTOR KIT MUST BE INSTALLED.
Features:
Non-reversible electromechanical gearmotor.
Limit switches for opening and closing.
Built-in release lever.
Electronic slowdown during closing/opening.
Electronic torque adjustment.
Power supply 230 Vac - 50 Hz.
CLICK THE LINKS FOR THE MANUALS:
KIT CONTENTS:
1 x 230v electromechanical gearmotor with built-in limit switch.
1 x Control unit housed in the motor casing, with motor force adjustment trimmer and obstacle detector,
Slowdown during opening and closing, 4 operating modes: step-by-step, semi-automatic 1 and 2, automatic condominium mode.
Courtesy light, surge protection, inputs for photocells and safety edges.
1 x Single-channel radio receiver built into the control unit (433.9 MHz)
1 x Antenna built into the control unit, range 20 metres (433.9MHz)
1 x 4-channel remote control
1 x Kit of 2 straight arms
2 x drive shafts
1 x 1.50 m galvanized crossbar
1 x Internal emergency release
1 x Set of screws and brackets for installation
1 x Mechanical and electronic installation instructions in ITALIAN
24-month warranty
eb: 223542918453
