Shipping
Shipping in 2-4 business days
Description
ELECTRONIC KIT FOR 1 MOTOR
230V
for sliding gates,
Up-and-over doors, barriers and shutters.
Professional
UNIVERSAL
Compatible with all 230V motors from:
Came, Nice, Faac, Rib, Tau, Beninca, Bft, Ditec, Vds, Life, Aprimatic and all other brands.
- Integrated 433.92 MHz radio receiver supporting fixed codes and HCS rolling codes.
(The receiver is compatible with most 433.92 MHz fixed-code / rolling-code remote controls
of the brands available on the market).
Dimensions: w.130 x h.95 x d.40 mm
GENERAL INFORMATION
The universal self-learning control unit is designed to automate an access system with
1 230VAC motor with or without electric limit switch. It features an innovative self-learning procedure
for rapid installation and two trimmers for fine adjustment of the main parameters: deceleration force and running force.
Available:
- rapid self-learning programming, in which the control unit automatically performs the learning cycle for the operating times
learn the operating times and set the start of deceleration to 85% of the operating cycle, both when opening and closing.
- professional programming, allowing the installer to determine the start point of deceleration,
leaf deceleration, enabling pedestrian opening via radio, and the intervention mode of the
safety devices.
MAIN FEATURES
Control and operation of access systems with 1 230VAC motor (max. 1200W)
• NC open-close limit switch input
• Motor speed adjustable via trimmer from 50-100%.
• Partial (pedestrian) opening via remote control or terminal block
• Pause time adjustable via trimmer from 0 to 120 seconds.
• Obstacle detection intervention time adjustable via trimmer from 0.1 to 3.0 seconds.
• Initial settings via DIP switches
• Indicator LEDs
• 230VAC courtesy light management, 500W max
• Built-in 433MHz receiver with a maximum of 254 storable radio codes
• Built-in flashing light logic management
• On-board reprogrammable Flash microprocessor via serial interface.
• Complies with the applicable European Directives: R&TTE 99/05/EC
CLICK THE LINK FOR THE INSTRUCTION MANUAL:
MANUFACTURER'S INSTRUCTION MANUAL
TECHNICAL SPECIFICATIONS
Transformer power supply: 230/18VAC 10VA
Control unit power supply: 230 VAC
Motor output: 230V max 1200W
Max. current draw of motor and accessories: Max 8 amperes, fuse-protected
Accessory power supply: 24 VDC - 150 mA, fuse-protected
Operating ambient temperature: -20°C / + 55 °C
Programming parameters: stored in EEPROM
KIT CONTENTS:
- No. 1 control unit
- No. 1 single-channel radio receiver built into the control unit (433.9 MHz)
- No. 1 antenna built into the control unit, range 20 metres (433.9 MHz)
- No. 1 4-channel rolling-code remote control
- No. 1 pair of wall-mounted photocells
- No. 1 230 V flashing light
- No. 1 warning sign
- No. 1 assembly instructions in ITALIAN
24-month warranty
eb: 233790692319
