Shipping
Shipping in 2-4 business days
Description
Complete kit for automating up-and-over doors
Counterweight-balanced
THE IRON ARMS IN THE BAZER UP-AND-OVER KIT MUST BE WELDED
for Intensive Use
Professional
Model BAZER 1M
The Bazer gearmotor is suitable for operating counterweight-balanced up-and-over doors with a maximum area of approximately 9 m².
It is equipped with a mechanical release system that allows the door to be operated manually in the event of a power failure.
Supplied as standard with limit switches for opening and closing.
Can be fitted with a courtesy light and electronic control unit with slowdown.
For large up-and-over doors, the use of two gearmotors is recommended.
WE RECOMMEND INSTALLING THIS AUTOMATION WHEN
THE SPACE BETWEEN THE DOOR AND THE CEILING IS LESS THAN 10 CM
IF THE DOOR IS MORE THAN 3 M WIDE, THE 2-MOTOR KIT MUST BE INSTALLED.
Features:
Irreversible electromechanical gearmotor.
Limit microswitches for opening and closing.
Built-in release lever.
Electronic slowdown during closing/opening.
Electronic torque adjustment.
Power supply 230 Vac - 50 Hz.
CLICK THE LINKS FOR THE MANUALS:
KIT CONTENTS:
No. 1 230 V electromechanical gearmotor with built-in limit switch.
No. 1 control unit located in the motor housing, with motor force adjustment trimmer and obstacle detection,
Slowdown during opening and closing, 4 operating modes: step-by-step, semiautomatic 1 and 2, automatic condominium mode.
Courtesy light, overvoltage protection, inputs for photocells and safety edges.
No. 1 single-channel radio receiver built into the control unit (433.9 MHz)
No. 1 antenna built into the control unit, range 20 metres (433.9 MHz)
No. 1 4-channel remote control
No. 1 kit with 2 straight arms
No. 2 drive shafts
No. 1 galvanized crossbar, 1.50 m
No. 1 internal emergency release
No. 1 set of screws and brackets for installation
No. 1 installation instructions for the mechanical and electronic parts in ITALIAN
24-month warranty
eb: 223542891742
