Shipping
Shipping in 2-4 business days
Description
PUSH-ON
AUTOMATIC RESET DEVICE FOR SINGLE-PHASE AND THREE-PHASE MINIATURE CIRCUIT BREAKERS.
NOT SUITABLE FOR CIRCUIT BREAKERS FOR PHOTOVOLTAIC SYSTEMS
With PUSH-ON, the innovative automatic reset device for miniature circuit breakers and isolators, forget the inconvenience of having to reset manually when the residual current device trips. A perfect ally for homes, offices, businesses and industrial installations.
WHY CHOOSE PUSH-ON?
Automatic reset: Restores power in seconds without manual intervention. Guaranteed safety: Compliant with UNI EN 12453-EN 12445 and CE.
Perfect for every need: Suitable for single-phase and three-phase circuit breakers.
Autonomy and reliability: Powered by a long-life 9Vdc battery, NOT INCLUDED.
Quick and easy installation: No modifications to existing systems.
Intelligent protection: If the circuit breaker trips repeatedly, the system locks out to prevent overloads.
The PUSH-ON does not alter or modify the operation of the existing system in any way.
The device requires no technical intervention or structural modifications: it is simply positioned and installed without any tampering, electrical connections or permanent modifications.
In addition, the product is CE certified, guaranteeing its compliance with European safety, health and environmental protection standards.
SUITABLE FOR:
Residential use: Ideal for second homes, homes with elderly residents or in the event of sudden power outages.
Businesses and shops: Prevents disruptive outages in commercial premises and offices.
Critical infrastructure: Perfect for security systems, telecommunications and industrial installations.
HOW DOES IT WORK?
1- PUSH-ON continuously monitors the status of the residual current circuit breaker.
2- PUSH-ON detects the disconnection event (tripping to OFF) and waits 20 seconds before making the first reset attempt.
3- If the first attempt successfully resets the circuit breaker, the device returns to standby mode within approximately 200 seconds.
4- If the problem persists, it makes a second attempt after another 20 seconds.
5- If both attempts are unsuccessful, the system activates the protection function, signaling the fault via the terminal output and preventing further unsafe reactivation attempts.
TECHNICAL FEATURES
Power Supply: 9Vdc battery (not included)
Standby Current: 0 mA.
Maximum Operating Current: 18 mA at 9Vdc for up to 8 seconds.
Cam Rotation Speed: 8 RPM at 9Vdc.
Minimum Number of Reset Cycles: 300 cycles.
Operating Temperature: from -30°C to +60°C.
Dimensions: 148 x 110 x 52 mm.
Weight: 360 g. Maximum Operating Current: 350 mAh.
Maximum Switching Voltage: 60 V AC/DC.
LED Indicator: Indicates the reset status (flashing during operation and off in standby).
Terminal Output (M): Normally open (NO) relay contact that activates for approximately 3 seconds (switching to the normally closed (NC) state) after two failed attempts, ideal for interfacing with alarm systems or other control devices.
DISCLAIMER OF LIABILITY – USE OF THE AUTOMATIC RESET DEVICE
This device is designed to facilitate the restoration of the electricity supply following the tripping of circuit breakers, without tampering with, modifying, or interfering in any way with existing metering or protection equipment.
Installation is permitted only downstream of existing electrical equipment, in compliance with applicable technical regulations, particularly standard CEI 0-21, and in accordance with the configuration and specifications of the user's electrical system.
The device:
- does not interfere with consumption measurement;
- does not improperly access the distribution network;
- does not replace or alter the certified protections provided by the system.
LEGAL DISCLAIMER
Before installation, it is the user's sole responsibility to verify that the device complies with regulations in the country or territory where it will be used. Technical and legal requirements concerning the use of devices connected to electrical systems may vary locally, regionally, or nationally.
LIMITATION OF LIABILITY
The manufacturer and seller disclaim all liability for:
- installations carried out in breach of applicable technical or legal regulations;
- improper, non-compliant, or unauthorized use of the device;
- any damage resulting from improper applications or unapproved modifications.
The purchaser assumes full responsibility for installing and using the product and must verify that the application complies with the regulations applicable to their electrical system. If in doubt, consultation with a qualified technician is strongly recommended.
The device is supplied solely as technical support for applications permitted by applicable regulations and does not alter the official configuration of the electricity supply in any way.
24-month warranty
eb: 376076195860
