Shipping
Shipping in 7-10 business days
Description
24 Vdc gearmotor for intensive use, with built-in control unit and virtual encoder
Mod. BULL424SE
SKU: 959003654
Residential use
24 Vdc
Up to 450 kg
Encoder signal recreated by the control unit based on measurements of the electric motor's operating parameters. Deceleration can be managed optimally, and the gate's path tracked, while delivering torque according to its position to ensure maximum safety
Intelligent power control system that acquires dynamic data by calculating torque precisely. STC System identifies any critical points, adjusting torque based on the measured operating curve and actual requirements
433.92 MHz receiver with proprietary Advanced Rolling Code (ARC) encryption
Ready for connection of X.BE (KNX) and Q.BE (MQTT) accessories
Ready for control unit management via the BeUP app and the pro.UP accessory, which recreates the control unit menu and allows parameters and logic settings to be adjusted, error messages to be read, and firmware to be updated. Remote diagnostics can be performed, the gate status can be checked, and commands can be sent
2048 transmitters can be stored in the receiver
Standby power consumption complies with European Regulation (EU) 2023/826
24 Vdc
intensive use
24 Vdc gearmotor for intensive use, with built-in control unit and virtual encoder
Standby power consumption complies with European Regulation (EU) 2023/826
115/230 Vac switching power supply for reduced energy consumption and a long actuator service life
The control unit, located on the upper part of the motor, makes wiring easier
The virtual encoder enables optimal management of deceleration, path tracking (STC System), and torque delivery based on the gate's position, ensuring maximum safety
Operation is guaranteed even in the event of a power failure using batteries that integrate perfectly with the motor
Anti-crushing system with amperometric detection
Ready for connection of the X.BE accessory to integrate KNX home automation systems and for programming via the BeUP app and PRO.UP interface
Reinforced foundation plate included. Dimensions: 326x164.5x2 mm, motor mounting centers: 301x75 mm, 4 holes Ø 8.5 mm
TECHNICAL DATA:
Use: residential
Mains power supply: 115 / 230 Vac (50-60Hz)
Motor power supply: 24 Vdc
Maximum current draw: 3.2 / 1.7 A
Maximum thrust: 535 N
Opening speed: 5.5 ÷ 12 m/min
Cycle
24-month warranty
eb: 376519027014
