Shipping
Shipping in 7-10 business days
Description
24 Vdc gearmotor for intensive use, with magnetic limit switches, built-in control unit and virtual encoder
Mod. BULL1024SE.S
SKU: 959003987
Condominium use
24 Vdc
Up to 1000 kg
Encoder signal recreated by the control unit based on measurements of the electric motor’s operating parameters. Deceleration can be optimally managed, and the gate’s travel tracked, with torque delivered according to its position to ensure maximum safety
Intelligent power control system that acquires dynamic data through precise torque calculations. The STC System identifies potential critical points by adjusting torque according to the measured performance and actual requirements
433.92 MHz receiver with exclusive Advanced Rolling Code (ARC) encryption
Ready for connection of X.BE (KNX) and Q.BE (MQTT) accessories
Ready for control unit management via the BeUP app and pro.UP accessory, which replicates the control unit menu and allows you to adjust parameters and logic, read error messages, and update the firmware. Remote diagnostics can be performed, gate status checked, and commands sent
2048 transmitters can be stored in the receiver
Standby power consumption complies with European Regulation (EU) 2023/826
24 Vdc
intensive use
24 Vdc gearmotor for intensive use, with magnetic limit switches, built-in control unit and virtual encoder
Standby power consumption complies with European Regulation (EU) 2023/826
115/230 Vac switching power supply for reduced consumption and a long actuator life
The control unit, located on top of the motor, makes wiring easier
The virtual encoder ensures optimal deceleration management, travel tracking (STC System) and torque delivery based on the gate position, ensuring maximum safety
Operation is guaranteed even in the event of a power failure thanks to batteries that integrate perfectly into the motor
Anti-crushing system with amperometric detection
Ready for connection of the X.BE accessory for integrating KNX home automation systems and for programming via the BeUP app and PRO.UP interface
Reinforced foundation plate included. Dimensions 326x164.5x2 mm, motor mounting center distance 301x75 mm, 4 holes Ø 8.5 mm
TECHNICAL DATA:
Use: condominium
Mains power supply: 115 Vac / 230 Vac (50/60 Hz)
Motor power supply: 24 Vdc
Maximum current draw: 4 / 2 A
Maximum thrust: 892 N
Opening speed: 5.5 ÷ 10.5 m/min
Cic
24-month warranty
eb: 376519027109
