Shipping
Shipping in 2-4 business days
Description
Complete Automation Kit for Up-and-Over Garage Doors
Counterweight
THE IRON ARMS IN THE BAZER UP-AND-OVER DOOR KIT MUST BE WELDED
for Intensive Use
Professional
Mod. BAZER 1M
The Bazer gearmotor is suitable for operating counterweight up-and-over doors with a maximum area of approximately 9 m².
It is equipped with a mechanical release system that allows the door to be operated manually in the event of a power failure.
Supplied as standard with opening and closing limit switches.
It can be equipped with a courtesy light and electronic control unit with slowdown.
For large up-and-over doors, the use of two gearmotors is recommended.
WE RECOMMEND INSTALLING THIS AUTOMATION WHEN
THE SPACE BETWEEN THE DOOR AND THE CEILING MUST BE LESS THAN 10 CM
IF THE DOOR IS MORE THAN 3 M WIDE, THE 2-MOTOR KIT MUST BE INSTALLED.
Features:
Irreversible electromechanical gearmotor.
Opening and closing limit microswitches.
Built-in release lever.
Electronic slowdown during closing/opening.
Electronic torque adjustment.
Power supply 230 Vac - 50 Hz.
CLICK THE LINKS FOR THE MANUALS:
KIT CONTENTS:
No. 1 230 V electromechanical gearmotor with built-in limit switch.
No. 1 control unit located in the motor housing, with motor force adjustment trimmer and obstacle detection,
Opening and closing slowdown, 4 operating modes: step-by-step, semiautomatic 1 and 2, automatic condominium mode.
Courtesy light, surge protection, inputs for photocells and safety edges.
No. 1 single-channel radio receiver built into the control unit (433.9 MHz)
No. 1 antenna built into the control unit, range 20 meters (433.9 MHz)
No. 1 4-channel remote control
No. 1 kit with 2 straight arms
No. 2 drive shafts
No. 1 1.50 m galvanized crossbar
No. 1 internal emergency release
No. 1 set of screws and brackets for installation
No. 1 instructions for assembling the mechanical and electronic components in ITALIAN
eb: 233249092803
