Control Unit for Sliding Gates, Up-and-Over Doors, Barriers and Shutters, Professional

UNIVERSAL

Compatible with all 230V motors from:
Came, Nice, Faac, Rib, Tau, Beninca, Bft, Ditec, Vds, Life, Aprimatic and all other brands.

- Built-in 433,92 MHz receiver with fixed-code or HCS rolling-code management.

IMPORTANT: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it works specifically with certain 433,92 MHz coding types. Below is the exact list of compatible models:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling-code encryption used by the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim and Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Remote Control Management

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note for universal remote controls: The Aster 21/a and Aster 31/1 models can be used as "master" remote controls to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them ready to use with the control unit.

Dimensions: w.130 x h.95 x d.40 mm

GENERAL INFORMATION
This self-learning universal control unit is designed to automate one access point with a 1 x 230VAC motor and limit switches. It features an innovative self-learning procedure for quick installation and two trimmers for fine adjustment of the main parameters: deceleration force and operating force.

Available features:
- Quick self-learning programming, in which the control unit automatically performs the operation-time learning cycle and sets the start of deceleration during both opening and closing at 85% of the movement.
- Professional programming, which allows the installer to determine when the gate leaf starts decelerating, enable pedestrian opening via radio, and set how the safety devices operate.

MAIN FEATURES
• Control and operation of automated access systems with 1 x 230VAC motor (max. 600W)
• NC open-close limit switch input
• Motor speed adjustable from 50-100% via trimmer.
• Partial (pedestrian) opening via remote control or terminal block
• Dwell time adjustable from 0 to 120 seconds via trimmer.
• Initial settings via dip switches
• Indicator LED
• 230VAC courtesy light control, 100W max
• Built-in 433MHz receiver with a maximum capacity of 254 stored radio codes
• Built-in flashing light logic control
• Complies with applicable European Directives: R&TTE 99/05/CE

CLICK THE LINK FOR THE INSTRUCTION MANUAL:
MANUFACTURER'S INSTRUCTION MANUAL

TECHNICAL SPECIFICATIONS
Transformer power supply: 230/18VAC 10VA
Control unit power supply: 230 VAC
Motor output: 230V max. 600W
Max. current consumption of motor and accessories: Max. 8 Amp, fuse-protected
Accessory power supply: 24 VDC - 150 mA, fuse-protected
Operating ambient temperature: -20°C / + 55 °C
Programming parameters: stored in EEPROM

24-month warranty
eb:233249135357