Control Unit for 230 V Swing Gates
433.92 MHz Receiver

Mod. EKOS-M2 230v

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

This universal self-learning control unit is designed to automate an access point with 1 or 2 230VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine adjustment of the main parameters: force, pause time, obstacle detection sensitivity and closing delay between the two motors.

Available features:

- A quick self-learning programming mode, in which the control unit automatically performs the learning cycle to acquire operating times and sets the start of deceleration, both during opening and closing, at 90% of the cycle.

- A professional programming mode, in which the installer can set when leaf deceleration starts, enable pedestrian opening by radio, and select how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Controls and manages automated access systems with 1 or 2 230VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedures for acquiring operating and deceleration times, and detecting the presence of safety devices.

• Motor force adjustable from 50-100% via trimmer.

• Customisable partial (pedestrian) opening

• Pause time adjustable from 0 to 60 seconds via trimmer.

• Obstacle detection response time adjustable from 0.1 to 3.0 seconds via trimmer.

• Motor closing delay adjustable from 3 to 30 seconds via trimmer

• 12V 15W electric lock control

• Courtesy light control

• Built-in 433MHz receiver

• 254 radio codes can be stored

• Reprogrammable Flash microprocessor

• Complies with the applicable European Directive: R&TTE 99/05/CE

• Supports radio transmitters with either simple fixed codes or rolling codes. Compatibility with other brands must be verified

WARNING: Radio Transmitter Compatibility Guide

The receiver built into the control unit is not universal; it works specifically with certain 433.92 MHz coding systems. The exact list of compatible models is provided below:

1. Compatible ROLLING CODE Radio Transmitters

The control unit supports the high-security rolling code encryption of the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED CODE Radio Transmitters and Universal Compatibility

If you use fixed-code remote controls, compatibility is guaranteed for:

Aster 21/a and Aster 31/1 models

Note for universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" remotes to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230VAC

Motor output: 2 x 1/2Hp

Motor current: Max 8 Amps

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function management: microprocessor with watchdog

24-month warranty
eb: 254771355045