Shipping
Shipping in 5-10 business days
Description
Barrier consisting of 1 pair of MW + 2 IR beams, 2TX and 2RX with dual optics, H 150 cm. 230V power supply
Mod. MANA DT SMA 15250 2X
SKU: MANA DT SMA 15250 2X
The MANA barrier range, with a range of 1 to 250 metres, is designed for the outdoor protection of large sites. It can be configured to suit installation requirements and the required security level: MW only, active infrared only, or combined dual technology, with each section providing an independent alarm output that can be managed in AND or OR mode directly by the alarm control panel. Robust aluminium structure with a protective polycarbonate screen, mounted on a base designed for floor or pit installation, or, on request, wall mounting using the relevant accessories. 230V power supply.
MANA DT SMA is a dual-technology IR and MW barrier featuring SMA (single man alignment) technology, making it ideal for sites with long perimeters where a higher security level is required. MANA DT SMA can be managed via the RS-485 BUS, which connects to the ADEBUS control panel for remote control of each field device. Built-in power supply and an exceptional dual-technology operating range of 1 to 250 m. The IR and MW sections each have separate outputs for independent management (OR or AND). The K-band MW allows use in narrow corridors, with a maximum lobe width of 4 m.
Outdoor range: 10-250 m
Indoor range: 1-500 m
Dual-beam optics: with 35 mm lenses in AND mode
MW frequency: 24GHz with 4 switchable channels
MW lobe dimensions: 4m
Synchronization: wired - optical
Photoelectric devices: Pulsed beams with a wavelength of 950nm
Aiming system: SMA optical-acoustic technology; electronic IR aiming via ON BOARD display for MW
Beam arrangement: Parallel or crossed
Dual-beam configuration: 2-3-4 TX / 2-3-4 RX
Terminal column beam configuration: \
Optics adjustment: 180° horizontal, 20° vertical
MW sensitivity adjustment: ON BOARD, alarm threshold \ detection area
IR detection system: OR- AND RANDOM on board or remotely configurable
Beam exclusion: 1st or 1st and 2nd beam, on board or remotely configurable
Crawl-through protection function: configurable ON Board
IR response time adjustment: 50-500ms with trimmer
Circuit power supply: 230 Vac with built-in linear power supply + toroidal transformer
Circuit current draw: 250 mA
Heater power supply: 24Vac, internally powered
Heater current draw: 45W - 150W depending on the number of beams and height
Battery compartment: 12V 7Ah max battery
Operating temperature: -25°C / + 70°C
IR alarm output: Relay with volt-free NC contacts (on RX column)
MW alarm output: Relay with volt-free NC contacts (40 ohm on RX column)
Tamper output: Column opening tamper (on both columns)
Fog disqualification output: Dedicated OC: NO to GND
IR anti-masking output: Dedicated OC: NO to GND
RS-485 output (wired synchronization only): Local and remote control with the Adebus system
Environmental class: 4
Material: Black polycarbonate screen, transparent to IR. Reinforced anodized extruded aluminium profile
Profile dimensions W x D x H: 250 mm x 200 mm, from 1000 to 4000 mm, on a round base with a diameter of 300 mm. On request, supplied with a dedicated base and accessories for pole or wall mounting
24-month warranty
