230V Control Unit for Swing Gates
433.92 MHz Receiver

Model EKOS-M2 230V

UNIVERSAL
for electromechanical and hydraulic operators
Professional

1. GENERAL INFORMATION

This self-learning universal control unit is designed to automate an access point with 1 or 2 230VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine adjustment of the main parameters: force, pause time, obstacle detection sensitivity and closing delay between the two motors.

Available options:

- quick self-learning programming, in which the control unit automatically performs the travel-time learning cycle and sets the start of deceleration, during both opening and closing, at 90% of the travel.

- professional programming, in which the installer can set when the leaves start to decelerate, enable pedestrian opening via radio and select how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Controls and manages automated access points with 1 or 2 230VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedures for learning travel and deceleration times and detecting the presence of safety devices.

• Motor force adjustable from 50-100% via trimmer.

• Customisable partial (pedestrian) opening

• Pause time adjustable from 0 to 60 seconds via trimmer.

• Obstacle detection response time adjustable from 0.1 to 3.0 seconds via trimmer.

• Motor closing delay adjustable from 3 to 30 seconds via trimmer

• Controls a 12V 15W electric lock

• Controls courtesy light

• Built-in 433MHz receiver

• Stores 254 radio codes

• Reprogrammable Flash microprocessor

• Complies with the relevant European Directives: R&TTE 99/05/CE

• Supports remote controls with either simple fixed code or rolling code. Compatibility with other brands must be verified

WARNING: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it communicates specifically with certain 433.92 MHz coding systems. The exact list of compatible models is provided below:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling code systems of the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim and Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Remote Controls

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note on universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" remotes to pair universal remote controls available on the market. Simply clone the code directly from one remote control to another to make them ready for use with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230VAC

Motor output: 2 x 1/2Hp

Motor current: Max. 8 Amps

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function controller: microprocessor with watchdog

24-month warranty
eb: 223542913468