Shipping
Shipping in 5-10 business days
Description
Single-phase control unit for rolling shutters and roller doors
The only hold-to-run system on the market that operates with transmitters and complies with current regulations
Savings and precision
• The control unit operates in AUTOMATIC mode during OPENING and in HOLD-TO-RUN mode during CLOSING. Everything is controlled by REMOTE CONTROL.
• One button opens the door fully with a single press, while the other closes it as long as it is held down.
• For safety reasons, the remote control range can be adjusted for each application.
• Installation and electrical wiring are greatly simplified.
• There is no longer any need to install external push buttons, key switches or lockboxes to secure the control system.
• The motor release must still be accessible from outside in applications where there is no secondary emergency access.
· Control unit for residential and commercial roller doors.
· Can operate in hold-to-run mode or in mixed semi-automatic mode (automatic opening, hold-to-run closing) using the DIP switch.
· No safety inputs.
· Operates exclusively with hold-to-run transmitters.
· 868 MHz receiver, 30 codes built in.
· Power supply/maximum motor power: 230V/up to 1200W (1.2CV) single-phase.
· Number of channels: 2 (OPEN and CLOSE).
· Mains power indicator light.
· Removable power supply and motor terminals.
· OPEN - CLOSE - STOP push-button input.
· Adjustable hold-to-run activation range via potentiometer.
· Standby/operating current consumption: 20 mA/70 mA.
· Operating temperature: from -20 °C to +85 °C.
· IP54 with cable glands.
· Dimensions: 140 × 220 × 55 mm.
Mod. ROLL868 DMR-P
