24V Control Unit for Swing Gates
with 433.92 MHz Receiver

Professional

with Enclosure and Transformer
+ N 2 4-channel remote controls

UNIVERSAL, SUITABLE FOR ALL AUTOMATION SYSTEMS

1. GENERAL INFORMATION

The self-learning universal control unit is designed to automate an access point with 1 or 2 24V motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine-tuning the main parameters: force, pause time, obstacle detection sensitivity and closing delay between the two motors.

WARNING: Remote Control Compatibility Guide

The receiver integrated into the control unit is not universal, but communicates specifically with certain 433.92 MHz encodings. Below is the exact list of compatible models:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling code encoding of the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Remote Control Management

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note on Universal Remote Controls: The Aster 21/a and Aster 31/1 models can be used as "master" units to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

The following are available:

- fast self-learning programming, in which the control unit automatically learns the operating times and sets the start of slowdown at 90% of the cycle during both opening and closing.

- professional programming that allows the installer to set the point at which the leaves begin to slow down, enable pedestrian opening via radio, and configure the operation of the safety devices.

2. MAIN FEATURES

DIMENSIONS: 17 CM X 9,5 CM X 3 CM 

Control and management of access for automated systems with 1 or 2 24V motors (max 1/2 Hp)

Simplified and professional self-learning procedure to learn operating and slowdown times, and detect the presence of safety devices.

Motor force adjustable via trimmer from 50-100%.

Customizable partial (pedestrian) opening

Pause time adjustable via trimmer from 0 to 60 seconds.

Obstacle detection response time adjustable via trimmer from 0.1 to 3.0 seconds.

Motor closing delay adjustable via trimmer from 3 to 30 seconds

12V 15W electric lock control

Courtesy light control

Built-in 433MHz receiver

255 radio codes can be stored

Flash microprocessor, reprogrammable on-board via serial interface.

Complies with the relevant European Directive: R&TTE 99/05/CE

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230VAC

Motor output: 2 x 1/2Hp

Motor current: Max 8 amperes

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EEPROM

24-month warranty
eb: 225539975044