Shipping
Shipping in 5-10 business days
Description
Sintap Roller Shutter Anti-Theft Sensor, 5 Contacts, Cord, Security Shutter, Pulse Counter Board
Model SS-SAL5CCSCIB
SKU: SS-SAL5CCSCIB
FAST PULSE COUNTER FOR SWITCHALLARM ROLLER SHUTTER SINTAP ALARM COMPONENT
SV-MSI Counter module for: fast NC and NO electrical pulses; it can monitor line continuity. Programmable via jumper from 1 to 8 very short pulses (less than 500 ms); counting ends when the relay is activated. Use: analysis of the SS-SAL Switchallarm, as well as any other sensor. If programmed for 2 or more pulses, it must receive at least 2 pulses within eight minutes to trigger an alarm. Self-resetting counting system; activates after 8 minutes without receiving further pulses. Can be programmed to count pulses only, without monitoring line integrity, making it suitable for unreliable contacts that may remain open; or to monitor line integrity. It can be used to check that multiple sensors (infrared, photocells, dual-technology) trigger an alarm simultaneously or consecutively, to monitor an entrance or route, or to prevent false alarms from overly fast sensors. 12 V power supply. Relay output: 1 changeover contact, 1 A, 24 V. Dimensions: L70 x W55 x H14 mm. Weight: 23 g. Assembled at the Securvera facility in Rome. Guaranteed by law against manufacturing defects and faults.
SS-SAL Switchallarm NC mechanical contact. The system is activated by a nylon cord approximately 2.7 to 3 metres long (mechanically determined), wound around and sliding over pulleys. Movement of the cord opens the contact for approximately 50 ms (requires the SV-MSI pulse counter amplifier). Suitable for roller shutters and security shutters, protecting them against cutting, tearing and lifting. Dimensions: L102 x W90 x D16 mm. Weight: 30 g. Assembled at the Securvera facility in Rome. Guaranteed by law against manufacturing defects and faults.
CLICK HERE TO DOWNLOAD THE MANUAL OR DIY GUIDE
MANUFACTURER'S MANUAL
24-month warranty
eb: 376020961133
