Notifier Inspire E10 2-Loop Control Panel HOP-131-206 Fire Safety

INSPIRE E10 2-loop control panel

SKU: HOP-131-206

Features

• Notifier INSPIRE E10 control panel with 6 module slots
• Includes 2-loop module, CPU module and charger module
• Door with 10" touchscreen display
• 240W power supply
• E10 rear enclosure
Side frame for surface mounting
• EN54-2, EN54-4, EN 54-13

Specifications

• Notifier INSPIRE E10 series fire alarm control panel
• 10" touchscreen display and backlit buttons with on-screen prompts to guide the user
• Modular system, easy to use and networkable
• 6 module slots (optional up to 10 slots)
• Includes 2-loop module, CPU module and charger module
• NOTIFIER Opal digital protocol (also supports legacy CLIP protocol devices)
• System configuration and commissioning via the control panel and commissioning tool
• Configurable day/night mode to suit site-specific requirements
• Full "Cause and effect" programming capability
• 240W power supply
• Power supply output: 36V, 6.7 A
• Operating voltage: 230V AC, 50Hz
• Voltage tolerance: -15%, +10% (from 195.5V to 253V)
• Mains input fuse: 3.15 A, T5AH / 250 V (20mm HCR fuse for surge protection in the mains terminal block)
• Input current: 1.2 A for 240 W PSU
• Capacity for optional batteries
• Battery circuit fuse: 25A
• Charger output voltage: 27.2 V nominal at 20°C (temperature compensation and current limiting)
• Standby batteries (Yuasa NP range): Minimum 12Ah (24V DC sealed lead-acid), maximum 24Ah
• Operating voltage for CIE output: 24V DC (±5%), same for each module
• Operating temperature: 0°C ~ +40°C
• Operating relative humidity: 5% ~ 95% (non-condensing)
• IP30 protection rating (EN60529)
• Cabinet adapted for 19" rack mounting or semi-flush mounting
• Door hinged on the left, opens with a 4 mm hex key
• Removable door with quick-release clip hinges
Side frame for surface mounting
• Mounting holes: 5 (in the rear box)
• Cable entry holes (20 mm): 30 (top), 17 (rear), 26 (bottom)
• External connections: 0.5 mm² to 2.5 mm² (14-22AWG) plug-in screw terminals
• Colour: RAL 7022, semi-gloss finish
• Dimensions: 455 (W) x 445 (H) x 190 mm
• Country code license must be ordered separately
• Complies with EN54-2:1997 + A1:2006
• Complies with EN54-4:1997 + A1:2002 and A2:2006
• Complies with EN54-13

24-month warranty

eb: 377147001276