Benincà Brainy Plus 917603674 230 Vac Control Unit, Original Automation

230 Vac control unit with integrated receiver

Mod. BRAINY PLUS

SKU: 917603674

230 Vac
Control unit that manages the encoder device for maximum precision during automation operating cycles
Function that automatically adjusts operating parameters to simplify system installation and commissioning
Ability to set the number of cycles after which a maintenance request warning is triggered on the system
Allows a programming protection code to be set for the control unit, preventing access to the menus and changes to the parameters
Ready for connection to X.BE (KNX) and Q.BE (MQTT) accessories
Ready for control unit management through the BeUP app and pro.UP accessory, which recreates the control unit menu to adjust parameters and operating modes, read error messages and update firmware. Remote diagnostics can be performed, gate status checked and commands sent
512 transmitters can be stored in the receiver
Standby power consumption compliant with European Regulation (EU) 2023/826

APPLICATION

1 or 2 actuators for swing gates, opposing sliding gates, hydraulic operators and industrial folding doors

CONTROL UNIT POWER SUPPLY

230 Vac - 50/60 Hz

MOTOR POWER SUPPLY

230 Vac / 600 W + 600 W

MAIN FUNCTIONS

Integrated LCD display
Integrated 433.92 MHz radio receiver, 512 codes and 3 radio coding types (Advanced Rolling Code, Rolling Code, Fixed Code)
Removable terminal blocks
Automatic, semiautomatic and hold-to-run operating modes
Encoder input for obstacle detection
Separate limit switch inputs for each motor
6 optoisolated inputs configurable as open, close, pedestrian, step-by-step, stop, photocell active during opening and closing, and photocell active during closing only
2 separate inputs for safety edges, configurable according to operating mode and type
Configurable 230 Vac and 12/24 Vdc electric lock output
Outputs configurable as gate-open indicator light, second radio channel, courtesy light, area light, accessory test output, flashing light output, gate-open alarm and NC input alarm
Automatic setting of operating parameters with all motor types
Electronic torque adjustment separately for each motor and adjustment of operating times for both opening and closing
Electronic torque adjustment with automatic calculation for every point along the travel (STC SYSTEM)
Adjustable slowdowns
Integrated ESA+ for energy saving
Ready for connection to X.BE (KNX) and Q.BE (MQTT) accessories
Configuration, diagnostics, firmware updates and remote control management via the BeUP app, using the PRO.UP accessory
Number of operating cycles
Programming access password
Maintenance warning
Standby power consumption compliant with European Regulation (EU) 2023/826

TECHNICAL DATA:
Control unit power supply: 230 Vac - 50/60 Hz
Motor power supply: 230 Vac / 600 W + 600 W
No. of storable codes: 512
Encoder: Yes
Virtual encoder: No
Inverter technology: No
STC System: No
ARC Only:

24-month warranty

eb: 226951303298