24V Swing Gate Control Unit
with 433.92 MHz Receiver

Professional

with Enclosure and Transformer
+ N 2 4-channel remote controls

UNIVERSAL, SUITABLE FOR ALL AUTOMATION SYSTEMS

1. GENERAL INFORMATION

The self-learning universal control unit is designed to automate one access point with 1 or 2 24V motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine adjustment of the main parameters: force, pause time, obstacle detection sensitivity and closing delay between the two motors.

WARNING: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it communicates specifically with certain 433.92 MHz encodings. Below is the exact list of compatible models:

1. Compatible ROLLING-CODE Remote Controls

The control unit supports the high-security rolling-code encoding of the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Remote Control Management

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note for Universal remote controls: The Aster 21/a and Aster 31/1 models can be used as "master" remotes to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them ready to use with the control unit.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

Available:

- fast self-learning programming, in which the control unit automatically performs the learning cycle to determine operating times and sets the start of slowdown during both opening and closing at 90% of the cycle.

- professional programming, allowing the installer to set when the leaves begin to slow down, enable pedestrian opening via radio, and select how safety devices operate.

2. MAIN FEATURES

DIMENSIONS: 17 CM X 9,5 CM X 3 CM 

Control and management of access systems with 1 or 2 24V motors (max 1/2 Hp)

Simplified and professional self-learning procedures for acquiring: operating and slowdown times, and the presence of safety devices.

Motor force adjustable via trimmer from 50-100%.

Customizable partial (pedestrian) opening

Pause time adjustable via trimmer from 0 to 60 seconds.

Obstacle detection response time adjustable via trimmer from 0.1 to 3.0 seconds.

Adjustable motor delay during closing, via trimmer from 3 to 30 seconds

12V 15W electric lock control

Courtesy light control

Built-in 433MHz receiver

255 radio codes can be stored

Flash microprocessor, reprogrammable on-board via serial interface.

Compliant with the relevant European Directives: R&TTE 99/05/CE

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230VAC

Motor output: 2 x 1/2Hp

Motor current: Max 8 Amps

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EEPROM

24-month warranty
eb: 374642393227