Card control unit for sliding gate 230v 220v compatible with Came Nice Bft

Control unit for sliding gates,

Overhead doors, barriers and shutters.

Professional

UNIVERSAL

Compatible with all 230V motors of:

Came, Nice, Rib, Tau, Beninca, Bft, Ditec, Vds, Life, Aprimatic and all the other brands.

- Integrated 433.92 Mhz radio receiver with HCS fixed and rolling code management.

(The receiver is compatible with most 433.92 Mhz fixed code / rolling code radio controls

of the brands present on the market).

Dimensions: w.130 x h.95 x d.40 mm

GENERAL INFORMATIONS

The self-learning universal control unit was designed for the automation of access to

1 230VAC motor with limit switch. It is equipped with an innovative self-learning procedure

for quick installation and two trimmers for fine adjustment of the main parameters: slowing force and running force.

Are available:

- rapid self-learning programming, in which the control unit automatically carries out the manoeuvre

learning of the maneuver times and sets the start of the slowdown both in opening and closing at 85% of the manoeuvre.

- professional programming in which the installer can determine the start time of the

slowing down of the leaf, enabling pedestrian opening via radio, the intervention mode of the

safety devices.

MAIN FEATURES

• Command and control of automated accesses with 1 230VAC motor (max 1200W)

• NC open - close limit switch input

• Motor speed adjustable via trimmer from 50-100%.

• Partial opening (pedestrian) both from remote control and from terminal block

• Dwell time adjustable via trimmer from 0 to 120 seconds.

• Obstacle control intervention time adjustable via trimmer between 0.1 and 3.0 seconds.

• Initial settings via dip-switch

• Signaling LED

• Courtesy light management 230VAC 500W max

• Built-in 433MHz receiver with up to 254 storable radio codes

• Built-in flashing logic management

• On-board reprogrammable Flash microprocessor via serial interface.

• Complies with the relevant European Directives: R&TTE 99/05/EC

CLICK ON THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

TECHNICAL FEATURES

Transformer power supply: 230/18VAC 10VA

Central power supply: 230 VAC

Motor output: 230V max 1200W

Max motor and accessories absorption: Max 8 Ampere protected by fuse

Accessory power supply: 24 VDC - 150 mA protected by fuse

Operating ambient temperature: -20°C / + 55°C

Programming parameters: stored in EEPROM

24 month warranty