Control Unit for Sliding Gates, Up-and-Over Garage Doors, Barriers and Shutters - Professional

UNIVERSAL

Compatible with all 230V motors from:
Came, Nice, Faac, Rib, Tau, Beninca, Bft, Ditec, Vds, Life, Aprimatic and all other brands.

- Built-in 433.92 MHz receiver with fixed-code or HCS rolling-code management.

PLEASE NOTE: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it communicates specifically with certain 433.92 MHz encodings. The exact list of compatible models is below:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling-code encoding of the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Remote Control Management

If you use fixed-code remote controls, compatibility is guaranteed for:

Aster 21/a and Aster 31/1 models

Note for universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" units to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

Dimensions: W.130 x H.95 x D.40 mm

GENERAL INFORMATION
The self-learning universal control unit is designed to automate one access point using a 230VAC motor with limit switches. It features an innovative self-learning procedure for quick installation and two trimmers for fine adjustment of the main parameters: deceleration force and operating force.

Available:
- Quick self-learning programming, in which the control unit automatically performs the travel-time learning cycle and sets the start of deceleration during both opening and closing at 85% of the travel.
- Professional programming, which allows the installer to set when the gate leaf starts decelerating, enable pedestrian opening by remote control, and select how safety devices operate.

MAIN FEATURES
• Control and management of automated access using 1 230VAC motor (max. 600W)
• Normally closed (NC) open-close limit switch input
• Motor speed adjustable via trimmer from 50-100%.
• Partial (pedestrian) opening via remote control or terminal block
• Pause time adjustable via trimmer from 0 to 120 seconds.
• Initial settings via dip switches
• Indicator LED
• 230VAC courtesy light control, 100W max
• Built-in 433MHz receiver with capacity to store up to 254 radio codes
• Built-in flashing light logic control
• Complies with the relevant European Directive: R&TTE 99/05/EC

CLICK THE LINK FOR THE INSTRUCTION MANUAL:
MANUFACTURER'S INSTRUCTION MANUAL

TECHNICAL SPECIFICATIONS
Transformer power supply: 230/18VAC 10VA
Control unit power supply: 230 VAC
Motor output: 230V max. 600W
Max. current draw of motor and accessories: Max. 8 A, fuse-protected
Accessory power supply: 24 VDC - 150 mA, fuse-protected
Operating ambient temperature: -20°C / + 55 °C
Programming parameters: stored in EEPROM

24-month warranty
eb:223542859942