Control Unit for 230 V Swing Gates
433.92 MHz Receiver

Mod. EKOS-M2 230v

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

The universal self-learning control unit is designed to automate an entrance with 1 or 2 230 VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine adjustment of the main parameters: force, pause time, obstacle detection sensitivity, and closing delay between the two motors.

Available features:

- quick self-learning programming, in which the control unit automatically performs the learning cycle to determine operating times and sets the start of deceleration at 90% of the cycle, both when opening and closing.

- professional programming, which allows the installer to set when the leaves begin to decelerate, enable pedestrian opening via radio, and configure how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Control of automated entrances with 1 or 2 230 VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedure for learning operating and deceleration times, and detecting the presence of safety devices.

• Motor force adjustable from 50-100% via trimmer.

• Customisable partial (pedestrian) opening

• Dwell time adjustable from 0 to 60 seconds via trimmer.

• Obstacle detection response time adjustable from 0.1 to 3.0 seconds via trimmer.

• Motor closing delay adjustable from 3 to 30 seconds via trimmer

• 12 V 15 W electric lock control

• Courtesy light control

• Built-in 433 MHz receiver

• Stores 254 radio codes

• Reprogrammable Flash microprocessor

• Complies with the applicable European Directive: R&TTE 99/05/EC

• Supports fixed-code or rolling-code remote controls. Compatibility with other brands must be verified

IMPORTANT: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it communicates specifically with certain 433.92 MHz coding systems. The exact list of compatible models is provided below:

1. Compatible ROLLING-CODE Remote Controls

The control unit supports the high-security rolling-code systems of the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Compatibility

If you use fixed-code remote controls, compatibility is guaranteed for:

Aster 21/a and Aster 31/1 models

Note on universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" remotes to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them ready for use with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230 VAC

Motor output: 2 x 1/2Hp

Motor current: Max 8 Ampere

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function controller: microprocessor with watchdog

24-month warranty
eb: 223542831690