Control Unit for 230 V Swing Gates
433.92 MHz Receiver 

Mod. EKOS-M2 230v

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

This universal self-learning control unit is designed to automate an access point with 1 or 2 230 VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine adjustment of the main parameters: force, pause time, obstacle detection sensitivity and closing delay between the two motors.

Available modes:

- A quick self-learning mode, in which the control unit automatically runs the learning cycle to acquire operating times and sets the start of deceleration, both when opening and closing, at 90% of the cycle.

- A professional programming mode, in which the installer can set when the gate leaves start to decelerate, enable pedestrian opening via radio control and select how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Control and operation of automated access points with 1 or 2 230 VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedures for acquiring operating and deceleration times and detecting safety devices.

• Motor force adjustable from 50-100% via trimmer.

• Customizable partial (pedestrian) opening

• Pause time adjustable from 0 to 60 seconds via trimmer.

• Obstacle detection response time adjustable from 0.1 to 3.0 seconds via trimmer.

• Motor closing delay adjustable from 3 to 30 seconds via trimmer

• 12 V 15 W electric lock control

• Courtesy light control

• Built-in 433 MHz receiver

• Stores up to 254 radio codes

• Reprogrammable Flash microprocessor

• Complies with the relevant European Directive: R&TTE 99/05/CE

• Supports fixed-code or rolling-code radio controls. Compatibility with other brands must be checked

WARNING: Radio Control Compatibility Guide

The receiver built into the control unit is not universal; it works with specific 433.92 MHz encoding systems. The exact list of compatible models is provided below:

1. Compatible ROLLING CODE Radio Controls

The control unit supports the high-security rolling-code encoding used by the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim and Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Radio Controls and Universal Compatibility

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note on universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" remotes to pair commercial universal remote controls. Simply clone the code directly from one remote to another to make them immediately operational with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230 VAC

Motor output: 2 x 1/2Hp

Motor current: Max. 8 Amperes

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function controller: microprocessor with watchdog

24-month warranty
eb: 223542829758