Control Unit for Sliding Gates, Up-and-Over Garage Doors, Barriers and Roller Shutters, Professional

UNIVERSAL

Compatible with all 230V motors from:
Came, Nice, Faac, Rib, Tau, Beninca, Bft, Ditec, Vds, Life, Aprimatic and all other brands.

- Built-in 433.92 MHz radio receiver with fixed-code or HCS rolling-code operation.

WARNING: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it works specifically with certain 433.92 MHz coding systems. Below is the exact list of compatible models:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling-code system used by the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim and Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Remote Controls

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note for universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" units for pairing commercial universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

Dimensions: w.130 x h.95 x d.40 mm

GENERAL INFORMATION
The self-learning universal control unit is designed to automate an access point with 1 230VAC motor with limit switches. It features an innovative self-learning procedure for quick installation and two trimmers for fine-tuning the main parameters: deceleration force and operating force.

Available options:
- A quick self-learning program, in which the control unit automatically performs the operation-time learning procedure and sets the start of deceleration to 85% of the operation in both opening and closing directions.
- A professional program in which the installer can determine when the gate starts to decelerate, enable pedestrian opening via radio, and select how the safety devices operate.

MAIN FEATURES
• Controls and operates automated access systems with 1 230VAC motor (max. 600W)
• NC open-close limit switch input
• Motor speed adjustable from 50-100% using a trimmer.
• Partial (pedestrian) opening via remote control or terminal block
• Pause time adjustable from 0 to 120 seconds using a trimmer.
• Initial settings via DIP switches
• Indicator LED
• 230VAC courtesy light control, 100W max.
• Built-in 433MHz receiver with a maximum capacity of 254 radio codes
• Built-in flashing light control logic
• Complies with the relevant European Directives: R&TTE 99/05/CE

CLICK THE LINK FOR THE INSTRUCTION MANUAL:
MANUFACTURER'S INSTRUCTION MANUAL

TECHNICAL SPECIFICATIONS
Transformer power supply: 230/18VAC 10VA
Control unit power supply: 230 VAC
Motor output: 230V max. 600W
Max. current draw of motor and accessories: Max. 8 Amps, fuse-protected
Accessory power supply: 24 VDC - 150 mA, fuse-protected
Operating ambient temperature: -20°C / + 55 °C
Programming parameters: stored in EEPROM

24-month warranty
eb:372685008554