Shipping
Shipping in 2-4 business days
Description
Remote control
RIB
SUN 2CH
2-channel
GENUINE
This model replaces the previous RIB MOON ch2 remote control and is 100% compatible
STARTING FROM AN OLD RIB MOON MODEL
1. Open the working remote control
2. The control board has miniature switches numbered
1 to 10, set to ON or OFF to determine the remote control code remote control
3. Briefly press button 1 on the new remote control release it
4. Within 2 seconds, press the second button and hold it pressed for 5 seconds. Release the button
5. The remote control LED lights up steadily and after turns off after a few seconds
6. Transmit the old transmitter's code by pressing buttons 1 and 2 on the new remote control:
button 1 corresponds to OFF, while button 2 corresponds to ON
7. After transmitting the code, the remote control LED
will remain lit for 3 seconds to indicate that the procedure was successful
STARTING FROM A RIB SUN
1. Press and release the button programming button on the control board receiver.
(P, PG, PROG, M, REC, CH1, ENR, MEMO)
2. Press and hold the button on the new remote control for 5 seconds
3. Wait 15 seconds and try to operate the automation system to check that it is working correctly
24-month warranty
