Metal Mass Detector 1 Channel Guglielmi Ultra Ii D-tek

1 channel metal mass detector

Mod. ULTRA II D-TEK

SKU: ULTRA II D-TEK

Single-channel metal mass detector, 1 relay output, for vehicle access control, industrial doors, automatic passages.
Power supply 12-24 VAC/VDC.

The DTEK UltraII loop detector is compatible with most gate drive systems. You can use it with the loop in the center, safety and exit positions. The display simplifies the setup process by displaying the optimal sensitivity setting needed to detect a vehicle positioned above the loop.
Ten sensitivity setting values allow fine adjustment of the detection level.
A PULSE/PRESENCE switch allows you to configure the output relay for presence or a 1 second pulse on the input.
Four frequency settings provide the flexibility to prevent crosstalk in multi-loop applications.

Main features
- ULTRAMETER™ - shows an optimal crosstalk sensitivity/interference setting
- 4 operating frequencies (low; medium-low; medium-high; high)
- Small size: 76 x 322 x 70 mm
- Automatic Sensitivity Boost (ASB): after initial detection, sensitivity increases to avoid losing contact with high-floor vehicles.
- Circuits: protected with momentary overcurrent suppression devices
- Power supply: 12V DC - 24V DC, 24V AC
- Connector: 7 positions
- Operating temperatures: from -40°C to +82°C
- CE compliant

The advantages of radar detection
The planar technology used by microwave motion sensors has no obstacles. She is not disturbed:
- from the wind
- from bad weather
- from the fog
- from the reflections of the sun
It can therefore work perfectly even in difficult external environmental conditions with a wide detection range for both moving and static subjects.

24 month warranty