Control Unit for 230V Swing Gates
433.92 MHz Receiver

Mod. EKOS-M2 230v

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

The universal self-learning control unit is designed to automate an access point with 1 or 2 230VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine-tuning the main parameters: force, pause time, obstacle detection sensitivity and closing delay between the two motors.

Available options:

- quick self-learning programming, in which the control unit automatically runs a learning cycle to determine operating times and sets the start of deceleration to 90% of the operating cycle, during both opening and closing.

- professional programming, which allows the installer to set when the gate leaves start decelerating, enable pedestrian opening via radio control and select how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Controls and operates automated access systems with 1 or 2 230VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedure to learn operating and deceleration times and detect the presence of safety devices.

• Motor force adjustable via trimmer from 50-100%.

• Customisable partial (pedestrian) opening

• Dwell time adjustable via trimmer from 0 to 60 seconds.

• Obstacle detection response time adjustable via trimmer from 0.1 to 3.0 seconds.

• Motor closing delay adjustable via trimmer from 3 to 30 seconds

• 12V 15W electric lock control

• Courtesy light control

• Built-in 433MHz receiver

• 254 radio codes can be stored

• Reprogrammable Flash microprocessor

• Complies with the relevant European Directive: R&TTE 99/05/EC

• Supports remote controls with either simple fixed code or rolling code. Compatibility with other brands must be verified.

WARNING: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it communicates specifically with certain 433.92 MHz coding systems. Below is the exact list of compatible models:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling code systems of the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim and Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Remote Controls

If you use fixed-code remote controls, compatibility is guaranteed for:

Aster 21/a and Aster 31/1 models

Note for universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" controls to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230VAC

Motor output: 2 x 1/2Hp

Motor current: Max. 8 Ampere

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function controller: microprocessor with watchdog

24-month warranty
eb: 373117938155