NUMERIC KEYPAD

METAL - BURGLARY-RESISTANT

WITH MAGNETIC CARD READER

(one card already included in the package)

BACKLIT

STANDALONE, NO MANAGEMENT MODULE REQUIRED

OPERATES ON DC POWER ONLY

ALSO AVAILABLE TO PURCHASE WITH POWER SUPPLY

SAM-3417

Professional

Technical features:
Solid steel frame, vandal-resistant and tamper-proof, programmable for up to 1,000 users (and transponder codes).
Alternatively, access can be granted using only a keypad code or a transponder. A transponder and the keypad can also be used together.
Each transponder is assigned a slot. This makes it possible to delete specific transponders if they are lost!
External door switch connected
Tamper switch in the housing
Door connection (to check whether the door is closed)
An audible signal when the door has been left open can be activated after one minute
Voltage-free relay (2A) for doors, gates, garages, roller shutters, etc.
Adjustable from 01 to 99 seconds
Alarm output switching time (tampering): 1 - 99 minutes
Non-volatile EEPROM memory
No PC connection required
Blue backlit steel keypad
Integrated LEDs
Suitable for all transponders (passive, 125KHz, EM4102 or compatible)
Easy parameter setup using the keypad (password-protected, 4-8 digits)

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

Technical data
Memory capacity: up to 1000 users (1000 transponder codes)
Transponder reading distance: 3-6cm depending on the type
Dimensions: 135x58x26mm for surface mounting
Power supply: 12V to 24V DC
Power consumption: 100mA
Voltage-free relay (2A)
Ambient temperature: -15 °C to 60 °C
Weight: approximately 500 g

How RFID works
RFID stands for radio-frequency identification, and the radio transmission is contactless.
RFID tags are microchips with a receiving and transmitting antenna; their 14-digit code can be transmitted without a battery.
Each transponder contains a unique, unchangeable code programmed during manufacture. The code is stored in the database
of the reader (or multiple systems) is stored.
Operation: The transponder's data is transmitted as a code and compared with the entries in the database.
If the code is known, the sensor output is activated; if the code is unknown, the sensor output is not enabled.

24-month warranty