Control Unit For Swing Gates Automation 230 Vac Board Dieffematic Ekos M2 230v

- 433.92 MHz receiver

230v

UNIVERSAL,

for electromechanical and hydraulic motors.

Professional

Mod. EKOS-2M 230v

1. GENERAL INFORMATION

The self-learning universal control unit was designed for the automation of 1 or 2 access

230VAC motors and is equipped with an innovative self-learning procedure for quick installation and

four trimmers for fine adjustment of the main parameters; strength, pause time, control sensitivity

obstacle and lag in closing between the two motors.

Are available:

- rapid self-learning programming, in which the control unit automatically carries out the manoeuvre

learning of the maneuver times and sets the start of the slowdown both in opening and closing at 90% of the manoeuvre.

- professional programming in which the installer can determine the instant the slowdown begins

of the leaves, the enabling of pedestrian opening via radio, the intervention mode of the safety devices.

CLICK ON THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Command and control of automated accesses with 1 or 2 230VAC motors (max 1/2 Hp)

• Simplified and professional self-learning procedure for the acquisition: of maneuvering times and

slowdown, and the presence of safety devices.

• Motor force adjustable via trimmer from 50-100%.

• Customizable partial (pedestrian) opening

• Dwell time adjustable via trimmer from 0 to 60 seconds.

• Obstacle control intervention time adjustable via trimmer between 0.1 and 3.0 seconds.

• Closing motor phase shift adjustable via trimmer between 3 and 30 seconds

• 12V 15W electric lock management

• Courtesy light management

• Built-in 433MHz receiver

• 254 storable radio codes

• Reprogrammable Flash microprocessor

• Complies with the relevant European Directives: R&TTE 99/05/EC

3. TECHNICAL CHARACTERISTICS

Central power supply: 230VAC

Engine output: 2 x 1/2Hp

Motor current: Max 8 Ampere

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function manager: microprocessor with watch-dog

24 month warranty