230V Control Unit for Swing Gates
433.92 MHz Receiver

Mod. EKOS-M2 230v

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

The universal self-learning control unit is designed to automate an access point with 1 or 2 230VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine adjustment of the main parameters: force, pause time, obstacle detection sensitivity, and closing delay between the two motors.

Available options:

- quick self-learning programming, in which the control unit automatically performs the learning cycle to acquire operating times and sets the start of deceleration to 90% of the cycle in both opening and closing.

- professional programming, in which the installer can determine when the leaves start to decelerate, enable pedestrian opening via radio, and select how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Control and management of automated access points with 1 or 2 230VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedures for acquiring operating and deceleration times, and detecting the presence of safety devices.

• Motor force adjustable via trimmer from 50-100%.

• Customizable partial (pedestrian) opening

• Pause time adjustable via trimmer from 0 to 60 seconds.

• Obstacle detection response time adjustable via trimmer from 0.1 to 3.0 seconds.

• Motor closing delay adjustable via trimmer from 3 to 30 seconds

• 12V 15W electric lock management

• Courtesy light management

• Built-in 433MHz receiver

• 254 radio codes can be stored

• Reprogrammable Flash microprocessor

• Complies with the relevant European Directive: R&TTE 99/05/CE

• Supports remote controls with either simple fixed code or rolling code. Compatibility with other brands must be verified

WARNING: Remote Control Compatibility Guide

The receiver integrated into the control unit is not universal; it communicates specifically with certain 433.92 MHz encodings. Below is the exact list of compatible models:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling code encoding of the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED CODE Remote Controls and Universal Remote Controls

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note on universal remote controls: The Aster 21/a and Aster 31/1 models can be used as "master" remotes to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them ready for use with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230VAC

Motor output: 2 x 1/2Hp

Motor current: Max. 8 Amps

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function manager: microprocessor with watchdog

24-month warranty
eb: 372685065527