Control Unit for Sliding Gates, Up-and-Over Garage Doors, Barriers and Roller Shutters - Professional

UNIVERSAL

Compatible with all 230V motors from:
Came, Nice, Faac, Rib, Tau, Beninca, Bft, Ditec, Vds, Life, Aprimatic and all other brands.

- Built-in 433.92 MHz receiver, supporting either fixed-code or HCS rolling-code transmitters.

WARNING: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it communicates specifically with certain 433.92 MHz encoding systems. Below is the exact list of compatible models:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling-code encoding used by the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim and Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Remote Controls

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note for universal remote controls: The Aster 21/a and Aster 31/1 models can be used as "masters" to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them ready to use with the control unit.

Dimensions: w.130 x h.95 x d.40 mm

GENERAL INFORMATION
This self-learning universal control unit is designed to automate one access point with a 230 VAC motor and limit switches. It features an innovative self-learning procedure for quick installation and two trimmers for fine adjustment of the main parameters: deceleration force and operating force.

Available features:
- Quick self-learning programming, in which the control unit automatically learns the operating times and sets the start of deceleration during both opening and closing at 85% of the operating cycle.
- Professional programming, which allows the installer to determine when the gate leaf starts to decelerate, enable pedestrian opening via remote control, and select how the safety devices operate.

KEY FEATURES
• Control of automated access systems with 1 230 VAC motor (max. 600 W)
• Open-close limit switch input, NC
• Motor speed adjustable from 50-100% using a trimmer.
• Partial (pedestrian) opening via remote control or terminal block
• Pause time adjustable from 0 to 120 seconds using a trimmer.
• Initial settings via DIP switches
• Indicator LED
• 230 VAC courtesy light control, max. 100 W
• Built-in 433 MHz receiver with storage for up to 254 remote-control codes
• Built-in flashing light logic control
• Complies with the relevant European Directive: R&TTE 99/05/CE

CLICK THE LINK FOR THE INSTRUCTION MANUAL:
MANUFACTURER'S INSTRUCTION MANUAL

TECHNICAL SPECIFICATIONS
Transformer power supply: 230/18 VAC 10 VA
Control unit power supply: 230 VAC
Motor output: 230 V, max. 600 W
Max. motor and accessory current draw: Max. 8 A, fuse-protected
Accessory power supply: 24 VDC - 150 mA, fuse-protected
Operating ambient temperature: -20°C / + 55 °C
Programming parameters: stored in EEPROM

24-month warranty
eb:254285670960