24 V Control Unit for Swing Gates
with 433.92 MHz Receiver

Professional

with Enclosure and Transformer

UNIVERSAL, SUITABLE FOR ALL AUTOMATION SYSTEMS

1. GENERAL INFORMATION

The universal self-learning control unit is designed to automate an access point with 1 or 2 24 V motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine adjustment of the main parameters: force, pause time, obstacle detection sensitivity, and closing delay between the two motors.

WARNING: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it works specifically with certain 433.92 MHz encodings. Below is the exact list of compatible models:

1. Compatible ROLLING-CODE Remote Controls

The control unit supports the high-security rolling-code encryption of the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Remote Management

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note for universal remote controls: The Aster 21/a and Aster 31/1 models can be used as "master" units to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

Available:

- fast self-learning programming, in which the control unit automatically runs the learning cycle to acquire operating times and sets the start of slow-down to 90% of the operating cycle during both opening and closing.

- professional programming, in which the installer can determine when the leaves begin to slow down, enable pedestrian opening via radio, and select how the safety devices operate.

2. MAIN FEATURES

DIMENSIONS: 17 CM X 9,5 CM X 3 CM 

Control and operation of automated access systems with 1 or 2 24V motors (max 1/2 Hp)

Simplified and professional self-learning procedure for acquiring operating and slow-down times, and detecting the presence of safety devices.

Motor force adjustable via trimmer from 50-100%.

Customizable partial (pedestrian) opening

Dwell time adjustable via trimmer from 0 to 60 seconds.

Obstacle detection response time adjustable via trimmer from 0.1 to 3.0 seconds.

Adjustable motor offset during closing via trimmer from 3 to 30 seconds

12V 15W electric lock control

Courtesy light control

Built-in 433MHz receiver

255 radio codes can be stored

On-board reprogrammable Flash microprocessor via serial interface.

Complies with the relevant European Directive: R&TTE 99/05/CE

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230VAC

Motor output: 2 x 1/2Hp

Motor current: Max 8 Amps

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

24-month warranty
eb: 223542969225