230 V Swing Gate Control Unit
433.92 MHz Receiver 

Mod. EKOS-M2 230v

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

The universal self-learning control unit is designed to automate an access point with 1 or 2 230 VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine-tuning the main parameters: force, pause time, obstacle detection sensitivity, and closing delay between the two motors.

Available options:

- a quick self-learning programming mode, in which the control unit automatically performs the learning cycle to determine operating times and sets the start of deceleration, both when opening and closing, at 90% of the cycle.

- a professional programming mode, in which the installer can determine when the leaves begin to decelerate, enable pedestrian opening via radio, and set how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Control and operation of automated access points with 1 or 2 230 VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedures for acquiring operating and deceleration times, and detecting the presence of safety devices.

• Motor force adjustable from 50-100% via trimmer.

• Customizable partial (pedestrian) opening

• Pause time adjustable from 0 to 60 seconds via trimmer.

• Obstacle detection response time adjustable from 0.1 to 3.0 seconds via trimmer.

• Motor closing delay adjustable from 3 to 30 seconds via trimmer

• 12 V, 15 W electric lock management

• Courtesy light management

• Built-in 433 MHz receiver

• 254 storable radio codes

• Reprogrammable Flash microprocessor

• Complies with the relevant European Directive: R&TTE 99/05/CE

• Supports remote controls with either simple fixed codes or rolling codes. Compatibility with other brands must be checked.

WARNING: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it communicates specifically with certain 433.92 MHz encodings. The exact compatible models are listed below:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling code encoding used by the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Remote Controls

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note for universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" remotes to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them work with the control unit straight away.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230 VAC

Motor output: 2 x 1/2Hp

Motor current: Max 8 Ampere

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function controller: microprocessor with watchdog

24-month warranty
eb: 254703592299