Control Unit for 230V Swing Gates
433.92 MHz Receiver 

Model EKOS-M2 230V

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

The universal self-learning control unit is designed to automate an access point with 1 or 2 230VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine adjustment of the main parameters: force, pause time, obstacle detection sensitivity, and closing delay between the two motors.

Available features:

- A rapid self-learning programming procedure in which the control unit automatically learns the operating times and sets the start of slow-down to 90% of the operating cycle, both when opening and closing.

- A professional programming procedure in which the installer can set when the leaves start to slow down, enable pedestrian opening via radio control, and configure how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Controls and manages automated access systems with 1 or 2 230VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedures for acquiring operating and slow-down times and detecting the presence of safety devices.

• Motor force adjustable from 50-100% via trimmer.

• Customizable partial (pedestrian) opening

• Pause time adjustable from 0 to 60 seconds via trimmer.

• Obstacle detection response time adjustable from 0.1 to 3.0 seconds via trimmer.

• Motor closing delay adjustable from 3 to 30 seconds via trimmer

• Controls a 12V 15W electric lock

• Courtesy light control

• Built-in 433MHz receiver

• Stores 254 radio codes

• Reprogrammable Flash microprocessor

• Complies with the applicable European Directive: R&TTE 99/05/CE

• Supports radio controls with either simple fixed codes or rolling codes. Compatibility with other brands must be verified

WARNING: Radio Control Compatibility Guide

The receiver built into the control unit is not universal; it communicates specifically with certain 433.92 MHz encodings. The exact list of compatible models is provided below:

1. Compatible ROLLING CODE Radio Controls

The control unit supports the high-security rolling code encoding used by the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Radio Controls and Universal Remote Controls

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note on universal remote controls: Aster 21/a and Aster 31/1 models can be used as "masters" to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230VAC

Motor output: 2 x 1/2Hp

Motor current: Max. 8 Amps

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function manager: microprocessor with watchdog

24-month warranty
eb: 233249224025